Install Kitchen Cabinets On The Level

You will want to check your four foot level for accuracy before you begin to install kitchen cabinets. By doing this, you will be sure of a quality and accurate installation.

So, the best way to insure that your cabinet installation will be started off on the right foot, I suggest that you visit your local rental store and rent a laser level. You will be assured of the most accurate level line possible. You can set up the laser level in a matter of a few minutes, and once you have determined the high point of your kitchen floor, you can shoot the laser line at that height. This is when you can go around the corners of the walls and mark the level line locations. You can then go around and connect all of the laser marks that you transferred with a chalk line. However, you will want to be sure of one thing here. Pull the chalk line as tight as possible to make sure that the line is not sagging in the middle. This will ensure that the line is not sagging in the center. Once you have snapped the chalk lines, you can go back with the laser level and double check the chalk lines. Now, if you do not have a rental store nearby, then you can use a four foot level to get the same results. But, you will need to be extra careful here and pay close attention to detail to ensure that the lines that you draw are accurate. So, once you have determined the high point of the floor, you can measure up thirty four and a half inches at the high point and use your level to draw the lines around the kitchen. If at all possible, have someone else help you with holding the other end of the level while you level it up and draw the level lines along the walls. After you have finished drawing the lines around the kitchen, flip the level end for end and reverse what you have just done. This is where you are going to find out for sure if the level is accurate and calibrated correctly. Only if the lines match up when you go back around the kitchen in reverse will the line be perfectly level. If the lines do not match up, your level is not accurate, and you will have to purchase a new one or have it recalibrated. This is the reason why I suggest that if at all possible you rent a laser level, or borrow one from a neighbor. It will save you some time at the beginning stages of the installation, but it will be the very best way to give you level lines to start with. Just remember that this step is like the foundation of a house. The entire process will be compromised if this step is not done correctly.

So now that you understand how to level for the cabinets, you will want to learn the rest of the steps in your kitchen cabinet installation. You can get all of the information you will need by visiting http://installkitchencabinetshelp.com.

Install Kitchen Cabinets By First Finding The High Spot In The Floor

Before you install kitchen cabinets in your new kitchen, there are a few steps that you need to take in order to get the job started off on the right foot.

Start by drawing out the new design on your walls after you have gone over your plans and have familiarized yourself with the new layout. Take your time and make sure that you get this step done in an exact manner.

By getting this step right to start with, you are going to make things a lot easier. The entire success of your kitchen installation rests on this step. The high point of the floor is the reference point that you will use for the entire installation process.

So, the very first thing that you will want to do is to measure up from the floor thirty inches and place a mark on the wall. Now, place a mark at this spot and using a four foot level, draw a level line along the walls where the cabinets are going to be placed.

Now, the next thing is to go around the level line every two feet and jot down the measurements up from the floor. Once you have dtermined which one of the measurements is the smallest, you have found the high point of the floor. Now you will want to measure up from this high point thirty four and a half inches and place another mark. Draw a new level line from this mark and you will have the top of the base cabinets established. This is the reference point that will represent the go to mark for the rest of the installation.

I cannot stress enough the importance of taking your time and getting this step exactly right. It is much like the base or foundation of any building structure. It has to be perfectly level. Something that you might want to do is to visit your local rental store and rent a laser level for this step. This will give you the most precise level line, and you will be able to move ahead with confidence knowing that the base of your new kitchen installation will be perfect.

Now that you know what one of the very first steps in your kitchen installation is, you will want to learn more of the steps that are involved in order for you to get the job done right. Visit http://installkitchencabinetshelp.com to download a guide just for homeowners who want to install their own kitchen.

Install Kitchen Cabinets - The Help You Need

By visiting this article, I am sure that you are about to start with the kitchen cabinet installation for your new kitchen and are looking for help. Surely you know how much in savings you are going to gain by doing it yourself, if only you had the advice of someone that can show you how to install your kitchen.

By learning how to install your own kitchen, those savings are going to be there when you have finished with the install. There are some basic steps that you need to take to get started, and this article will help you with a few of those first steps. Now, the first order of business is to go over your new design and become very familiar with how your new kitchen is going to look. I know that this step seems trivial, but by having the new design engrained in your mind is going to make a huge difference between your confidence levels. So why do you need to become familiar with the new design of your kitchen? Believe me, by being able to visualize how you new kitchen is going to look when you finish the job is going to give you the confidence in yourself that you can do this. Having a mental picture in your mind as well as the drawings that you have been given by your designer goes a long way towards a successful installation. By drawing out the wall cabinets and the base cabinets on your kitchen walls, you can get this picture you are looking for. This is going to bring to light anything that will need to be addressed before you start with the installation. Check to see if there are any wires or plumbing pipes that need to be relocated first. Just be sure that everything is where it needs to be before you begin with the installation. One other step that you will want to take care of before you start with the cabinets instalaltion is to have the flooring installed ahead of time. This will make it easier on your floor technician as well as you. Just be sure to protect the new floor when you are working in the kitchen. However, if you have chosen a flooring such as a floating floor or perimeter glued vinyl, you will want to wait until the cabinets are in. These flooring types need to be able to move freely, and if you install the cabinets on top of them, they will not be able to do so.

There are many more steps to installing a kitchen, and with my help, you will be able to do it on your own and save yourself a lot of money. But only if you are able to avoid some of the most commonly made mistakes that can be very costly. Visit http://installkitchencabinetshelp.com to get the inforamtion that you need.

Install Your Own Dream Kitchen

If you are searching for information on how to install kitchen cabinets, you are probably frustrated with the limited amount of information available to you. In order for you to fully grasp the know-how of installing kitchen cabinets, you need a step by step guide to bring you through the process from the beginning to the end. Videos only show you so much, and are you really getting the idea anyway.

Having very little experience, you are probably thinking that installing your own kitchen is going to be an impossibility. Having a guide or handbook would be just the thing to guide you along step by step through the process. Pictures and diagrams that went along with the guide would be great too.

A guide that will give you detailed pictures and diagrams for each step along the way. Just by viewing one of those videos is not even scratching the surface. They do not show you what to do if you run into a problem. Do they explain how to frame for peninsula base and wall cabinets. Are they going to explain to you what to do if your walls are out of plumb and you need to scribe a filler. No, they show you how to screw a cabinet against a perfectly level and flat wall, and in all reality, that very rarely is the case.

It would be great if there was a guide for you that would cover all of the aspects of a kitchen remodel. Even better would be phone and email support to go hand in hand with the guide. Having the invaluable advice and support from a professional would be awesome. Do not let anyone tell you that installing kitchen is easy and anyone can do it. Screwing the cabinets on the wall is just the beginning and does not cover a tenth of what needs to be considered. A lot more.

Those videos and short articles do not even touch on the other things that come into play when installing a kitchen. I applaud you for wanting to install your own kitchen. You are going to need a resource that will keep you from those costly mistakes that could wipe out all of your savings by doing it yourself. If only you had something like I just explained, you would be able to install your kitchen with confidence and with the support of a professional. But really, is there actually anything like that out there.

Yes there is. I have put together a detailed guide just for you on how to install kitchen cabinets and other aspects of your kitchen remodel. I offer phone and email support along with the guide. Click this link to get more information on how you can install your own kitchen cabinets. http://installkitchencabinetshelp.com .

Some Things You Need To Discuss Before You Install Kitchen Cabinets

The first thing that comes to mind is the layout of the appliances. You are going to need to make sure that they form the working triangle.

Maybe you would like a larger refrigerator, or add a dishwasher, or possibly incorporate a microwave over the range. Are there certain cabinets that you want to include in the new kitchen design, such as a tall pantry cabinet, a lazy- susan cabinet, or maybe a refrigerator cabinet that extends out to meet the front of the refrigerator.

Are the wall cabinets that you have now tall enough or do you want cabinets that will reach to the ceiling of the room. Is there a possibility of opening up the kitchen to other rooms of your house. This will create the appearance of a larger kitchen if you are limited on space. Something else that should be discussed is the countertops.

It will not be very practical for you to install granite tops if you have small children who could accidentally scratch them. Granite will scratch easily and the abuse that it could take with small children will leave you frustrated.

Flooring is another aspect of the kitchen design that needs to be discussed. Just make sure that the new floor is installed before you install the kitchen cabinets, unles the type of floor that you have chosen is a floating floor. You will want to convey this information to your kitchen designer.

Custom cabinets are expensive, but they are also something that can make the kitchen all the more unique to your home. Maybe a custom island cabinet that will stand out and be a feature piece of the room.

Bumping up some of the wall cabinets or even bumping them out will give your kitchen a unique feel to it. Your door styles that you decide on as well as stain colors and finshes is something that you are going to want to consider as well.

You can get more information by visiting http://installkitchencabinetshelp.com

How to Install Kitchen Cabinets - The Basics

If you know how to install kitchen cabinets in your own kitchen, it is possible to save yourself a lot of money. But better yet, you will be able to stand back at the end of the day and look upon the creation that you made.

By understanding the basics of your kitchen installation process, you will feel confident that you will be able to get the job done without making any costly mistakes.To start off, I suggest that you become very familiar with your new kitchen layout as this will help you to visualize what the end product will look like.

What will help you greatly will be to actually draw the layout on the kitchen walls. By doing this, you will get a better understanding of exactly how to go about the installation of the cabinets. Hopefully, you have had a professional designer draw up your new kitchen and supplied you with a three dimensional drawing or layout for your use.

Closely examine how the cabinets are laid out on the kitchen walls. Double check that you have all of the cabinets for your new design. You will want to make sure that the wiring for appliances are in the proper locations, and that any electrical devices do not have to be moved. You might find that these wires or outlest will need to be moved. Moving this wiring is not a big deal and your electrician can take care of it for you.

Making sure that everything is loacted properly will help you in the long run before you get started with the installation.So, now that you have made sure that the wiring and plumbing is located properly, you will need to find the high point of the floor. Whenerver possible, have the new flooring installed before you plan on installing the new kitchen cabinets to ensure that all of the cabinets are placed securely on the new floor.

Do this beforehand so that the rest of the kitchen installation goes smoothly. During the cabinets install, protect the floor as much as possible. But, if you are planning on a floating floor or perimeter glued vinyl, these floors will have to be installed after the kitchen is finished. These types of flooring need to be able to free float, so to speak, and having the base cabinets sitting directly on them would not allow the floor to move as it is supposed to.So, once the floor is down, you will want to measure up from the floor at any given spot and place a mark that is thirty inches off of the floor on the wall.

Wherever the base cabinets are going to be installed, draw a level line around the walls from the measured point. Roughly every two feet or so, measure up from the floor to the level line and make a not as to what the smallest measurement was and where it was located. This will be the highest point of the kitchen floor. To make a line that represents the top of the base cabinets, measure up thirty four and a half inches from the high point of the floor.

This will represent the top of the base cabinets and will serve as your reference point for the wall cabinets as well. You are going to learn that there is a lot more to a kitchen installation than just screwing cabinets to a wall. I have put together a comprehensive resource that covers all of the details that you might encounter in your kitchen remodel.

Install Kitchen Cabinets In Your New Kitchen

You have a kitchen remodeling project and you want to tackle the kitchen cabinet installation yourself, but you are not quite sure where to start. I am here to give you some pointers on how to install kitchen cabinets in your new kitchen, giving you the confidence that you can do it.

So, first things first, you need to become familiar with your new layout of the kitchen. Study the new design and imagine what the new room will look like when you are finished with the remodel.

Doing this step will help you to understand all of the steps needed for the installation. Determining that each cabinet that is installed is level and plumb will make things go a lot easier. Do not underestimate this step.

Take your time and get it right. Most people fail to recognize the complexity of hanging kitchen cabinets. Understand that there is a lot more to a kitchen installation than just fastening cabinets up against the walls. If you do not take your time and get things just right, the end results are going to reflect that.

Many times I have had carpenters tell me that my line of work was easy until they were presented with a kitchen install and they quickly realized how complex it can get. When it came down to it, they had some serious problems and had no way of figuring out how to move ahead. Something that they quickly realized was that correctly installing the cabinets as opposed to just screwing them into place was altogether two different situations.

This does not mean that you cannot do it yourself or that you need to be good with woodworking, it is just that there are some things that you need to understand about installing kitchen cabinets correctly. Making sure that the cabinets are level, plumb, and in a straight line with each other is the most important aspect to any kitchen cabinet installation.

So for example, the countertop fabricator is coming to make up the template for your top and right away notices that the cabinets that you have installed are not straight, have a slight hump in between them or are not perfectly level. He will more than likely advise you that he cannot make the template due to the errors in the installation, pack up his stuff and make a return trip later once the mistakes have been taken care of.

A stone counter-top fabricator will not install their product unless the cabinets are perfectly flat and level. If you have chosen a stone top and the cabinets have a slight hump in them at some point, the installation is going to get very ugly really fast. Your kitchen cabinet installation needs to be precise in order for everything else to fall into place.

By making costly mistakes during the installation, you are basically wasting the money that you would have saved by installing the cabinets yourself correctly.

Install Kitchen Cabinets In Your New Kitchen

You want to save yourself some money by installing kitchen cabinets yourself, but you are not quite sure how to go about it. With my experience and knowledge of kitcen remodeling, I am going to sare with you the basics of kitchen cabinet installation as well as other finer details of the process.

The very first thing that I suggest that you do is familiarize yourself with the new design. Study the new design and imagine what the new room will look like when you are finished with the remodel. Doing this step will help you to understand all of the steps needed for the installation.

Determining that each cabinet that is installed is level and plumb will make things go a lot easier. Please get this step right. You need to make sure that you take your time with this. Most people fail to recognize the complexity of hanging kitchen cabinets. Understand that there is a lot more to a kitchen installation than just fastening cabinets up against the walls. Sure, you can just throw the cabinets against the wall and screw them in place, but the end result is going to look like it as well.

It is funny how many different rough and trim carpenters told me that my work was simple until they actually tried a complex kitchen installation. It was a little funny to see how difficult it actaully was for them to tackle one of the more complex installations. It was not long until they understood that installing kitchen cabinets and actually knowing how to correctly install them was two totally different things.

This does not mean that you cannot do it yourself or that you need to be good with woodworking, it is just that there are some things that you need to understand about installing kitchen cabinets correctly. The very most important part of a kitchen install is to make sure that each and every cabinet is installed level and plumb.

So for example, the countertop fabricator is coming to make up the template for your top and right away notices that the cabinets that you have installed are not straight, have a slight hump in between them or are not perfectly level. More than likely, the fabricator will refuse to make a template until you have fixed all of the problems. Any countertop fabricator will refuse to install their tops until the cabinets are straight, flat and level.

You will find that choosing a solid surfaced top is going to be very unforgiving in that it will not conform to the cabinets surface, making it imperative that you get the base cabinets flat and level. Your kitchen cabinet installation needs to be precise in order for everything else to fall into place.

You can install kitchen cabinets yourself and save money in the process, but if you are not careful, then the mistakes that you could possibly make will eat into those savings.

Install Kitchen Cabinets Yourself and Save Thousands

It would be great that by doing it yourself, you could put that extra money to work for you, such as new appliances, upgraded countertops, flooring or possibly even custom cabinets. If you install kitchen cabinets yourself, you can do just that!



But, as with any home improvement project, there are some things that you will need to know if you plan on doing it yourself. I will be glad to help you along the way if you have been searching for the answer to installing kitchen cabinets on your own in that new kitchen of yours.

Now, to begin with, you are going to need some basic hand tools and power equipment to get the job done right. The tools that I am referring to is the hammer, drill, whether power or battery operated, jig saw, nail set, countersink drill bits, belt sander, table saw or even a circular saw, a two foot and four foot level and a tape measure.

So, the next step in the installation of your new kitchen is to go over the layout of the new design, and to determine the highest point of your existing kitchen floor. So, once that task has been completed, you will want to start with the corner wall cabinet.

You will want to use your stud finder to determine where the studs are located behind the wall. Take those measurements of the stud locations and transfer them onto the back of the corner wall cabinet, or preferably on the inside of the cabinets.

This is where you will want to double check that the marks for the drill holes are loacted close to the top and bottom of the cabinet which is the strongest point. This is very important that you make sure to take your time and install the kitchen cabinets level and plumb in order to keep the run of cabinets straight and true.

I cannot emphasize this last step enough, because if you get this wrong, you are going to be hating life a little later down the road. Trust me, you will have a much easier time with your kitchen cabinet installation if you take the time to do so.

You will find that your walls are not going to be perfect, and you will have to shim the wall cabinet in several areas. Again, you will find that by getting this step right, the rest of the cabintery will just be placed against the previous cabinet and screwed into place.

Now, this by no means that you will not have to plumb and level the next cabinets, but you will not be faced with the problem of trying to overcome the incorrect installation of the first cabinet. Now, in order to make the cabinets ligher and to protect the doors, I recommend that you remove them from the cabinets.

You want to make sure that you try to keep any damage to the doors to a minimum, because as you would find out if you needed to have one replaced, they are the most expensive part of the cabinet.

There are so many different aspects to any kitchen remodeling project that just knowing the basics as to how to install kitchen cabinets is not going to be enough to go on if you are trying to do the job yourself.

However, if you have the information and the advice from someone that has experience in kitchen remodeling, you should be able to install your kitchen without any problems, so I have put together a guide for you at http://installkitchencabinetshelp.com/.